Laserfiche WebLink
4. The digital signage text should facilitate maximum readability. The text <br />should utilize ADA -approved fonts, such as Calibri and Helvetica. The <br />characters should be sans -serif. Italic, oblique, script, highly decorative, or <br />unusually shaped characters are prohibited. This subsection shall not apply <br />to fonts used to display a logo, which may vary. <br />5. No words, phrases or characters should be used if they will interfere with <br />mislead or confuse traffic, or a traffic sign, signal or device. No sign shall <br />display light of such intensity to cause glare or otherwise impair the vision <br />of a driver. <br />6. The maximum brightness shall not exceed a brightness level of 0.3 <br />footcandles over ambient lighting conditions when measured with a light <br />meter held perpendicular to the sign at 10 ft. away. <br />7. All electronic message centers shall come equipped with functioning <br />automatic dimming technology/light sensing devices which automatically <br />adjust, at all times while the electronic message center is operating the <br />sign's brightness in direct correlation with ambient light conditions, in order <br />to ensure the message meets the standard for maximum brightness. <br />8. If a sign malfunctions, fails, or ceases to operate in its usual or normal <br />programmed mamier, the sign must be repaired or disconnected within <br />forty-eight (48) hours by the owner/operator of the sign. The sign must be <br />equipped with a default mechanism or setting that will cause the sign to turn <br />off or show a black screen if a visible malfunction or failure occurs. <br />H. Setbacks. The setback for a sign that integrates an EMC shall be the same <br />setback for the monument sign in that zoning district. <br />L Location. <br />1. Signs less than 100 feet from a residential or multi -family zoning district <br />or less than 100 feet from a residential or multi -family use including those <br />multi -family uses in a Planned Mixed -Use development, may not display <br />an EMC. <br />2. Signs with an EMC may not be located adjacent to a Local Residential <br />Street. <br />3. Signs with an EMC greater than 40% of the sign area may not belocated <br />within 1000 feet of a signalized jntersection or another sign with an EMC. <br />4. Only one EMC is permitted per street frontage. <br />J. A non -conforming sign is prohibited from adding an EMC to the sign face. <br />Ordinance 25-1619 <br />Page 4 of 6 <br />